Coolant-Fed Tooling Accessories

Download the Full Accessories Catalog

Every size, dimension and part number in one printable PDF — plus the coolant-fed tooling lines not shown on this page.

Stop screws, coolant seal adapters, lathe bushings, Morse taper reducing sleeves, shell mill hardware, compression nosepieces, ER clamping nuts and wrenches, plus the CFT Model 1000 high pressure air-operated pumping system.

Stop Screws, Seals & Adapters

Solid Steel Stop Screw

IMPERIAL

LEFT HAND THREAD

Note: When coolant-thru-the-tool is not necessary, these screws can also be used as a standard Backup or Adjusting Screw

▶View All Solid Steel Stop Screw Part Numbers21 items

Part Number	Old Part No.	Thread Size
101-001	855-001	3/4-16 L.H.
101-002	855-002	13/16-16 L.H.
101-003	855-003	1-1/8-16 L.H.
101-004	855-004	1-1/4-12 L.H.
101-005	855-005	7/16-20 L.H.
101-006	855-006	5/8-18 L.H.
101-007	855-007	1-5/8-12 L.H.
101-008	855-008	1-3/8-12 L.H.
101-009	855-009	7/8-14 L.H.
101-010	855-010	15/16-16 L.H.
101-011	855-012	3/8-24 L.H.
101-012	855-013	9/16-18 L.H.
101-013	–	1-3/8-16 L.H.
101-014	–	1-5/8-16 L.H.
101-015	–	1-1/4-16 L.H.
101-016	–	7/16-16 L.H.
101-017	–	5/8-16 L.H.
101-018	–	9/16-16 L.H.
101-019	–	7/8-16 L.H.
101-020	–	11/16-16 L.H.
101-021	–	1/2-16 L.H.

ER Solid Steel Coolant Style Stop Screw

IMPERIAL

METRIC THREAD M12

Note: When coolant-thru-the-tool is not necessary, these screws can also be used as a standard Backup or Adjusting Screw

▶View All ER Solid Steel Coolant Style Stop Screw Part Numbers6 items

Part Number	Old Part No.	Thread Size
101-023	–	M12 x 1.75
101-024	–	M12 x 1.50
*101-025	–	M12 x 1.75
*101-026	–	M12 x 1.5
*101-027	–	M12 x 2.0
*101-028	–	M12 x 2.0

* Non-Coolant Solid

Nylon Cap Stop Screw

IMPERIAL

STEEL WITH NYLON CAP • LEFT HAND THREAD

Note: These screws are steel with a nylon cap to seal against the end of a recessed drill.

▶View All Nylon Cap Stop Screw Part Numbers12 items

Part Number	Old Part No.	Thread Size
102-001	851-001	3/4-16 L.H.
102-002	851-002	13/16-16 L.H.
102-003	851-003	1-1/8-16 L.H.
102-004	851-004	1-1/4-12 L.H.
102-005	851-005	7/16-20 L.H.
102-006	851-006	5/8-18 L.H.
102-007	851-007	1-5/8-12 L.H.
102-008	851-008	1-3/8-12 L.H.
102-009	851-009	7/8-14 L.H.
102-010	851-010	15/16-16 L.H.
102-011	851-012	3/8-24 L.H.
102-012	851-013	9/16-18 L.H.

Solid Nylon Stop Screw

IMPERIAL

SOLID TEFLON • LEFT HAND THREAD

Note: These screws are solid teflon designed for leak-proof sealing of threads whenever minimum in and out adjustment is necessary.

▶View All Solid Nylon Stop Screw Part Numbers12 items

Part Number	Old Part No.	Thread Size
103-001	851-101	3/4-16 L.H.
103-002	851-102	13/16-16 L.H
103-003	851-103	1-1/8-16 L.H.
103-004	851-104	1-1/4-12 L.H.
103-005	851-105	7/16-20 L.H.
103-006	851-106	5/8-18 L.H.
103-007	851-107	1-5/8-12 L.H.
103-008	851-108	1-3/8-12 L.H.
103-009	851-109	7/8-14 L.H.
103-010	851-110	5/16-24 L.H.
103-011	851-111	15/1-16 L.H.
103-012	851-112	3/8-24 L.H.

End Mill Holder Coolant Stop Screw

IMPERIAL

INCH & METRIC THREAD

▶View All End Mill Holder Coolant Stop Screw Part Numbers8 items

Part No.	Old Part No.	(A) Thread Size	B
105-001	854-001	1-1/8-12 L.H.	0.745
105-002	854-002	1-1/8-16 L.H.	0.745
105-003	854-003	3/4-10 R.H.	0.365
105-004	854-004	1-8 R.H.	0.490
105-005	854-005	5/8-11 R.H.	0.365
105-006	854-006	M24X3 L.H.	0.490
105-007	854-008	M16X2 L.H.	0.365
105-010	–	1-8 R.H.	0.490

Coolant Seal Adapter

IMPERIAL

SOLID NYLON • I.D. 0.125 – 0.234

Note: These solid nylon adapters should be used for straight tools 15/64” or smaller for maximum leakage control.

▶View All Coolant Seal Adapter Part Numbers8 items

Part Number	Old Part No.	A I.D.
107-001	853-001	0.125
107-002	853-002	0.140
107-003	853-003	0.156
107-004	853-004	0.171
107-005	853-005	0.187
107-006	853-006	0.203
107-007	853-007	0.218
107-008	853-008	0.234

Rear Oil Feed Adapters

IMPERIAL

LEFT HAND THREAD

▶View All Rear Oil Feed Adapters Part Numbers5 items

Part Number	Old Part No.	Size
108-001	852-001	3/4-16 L.H.
108-002	852-002	13/16-16 L.H.
108-003	852-003	1-1/8-16 L.H.
108-004	852-004	1-1/4-12 L.H.
108-005	852-005	1-5/8-12 L.H.

Extended Stop Screw for Use with End Mills

IMPERIAL

END MILL RANGE 1/2 – 1-1/2

Note: This stop screw must be used in conjunction with a non-pullout end mill collet to assure proper seal.

▶View All Extended Stop Screw for Use with End Mills Part Numbers7 items

Part Number	Old Part No.	Thread	End Mill Range
109-001	600-001	1-1/8-16 L.H.	1/2-5/8
109-002	600-002	1-1/8-16 L.H.	3/4-1
109-003	600-003	1-5/8-16 L.H.	1/2-5/8
109-004	600-004	1-5/8-16 L.H.	3/4-1
109-005	600-005	1-5/8-16 L.H.	1-1/4 -1-1/2
109-006	600-006	1-1/4-12 L.H.	1-1/4 -1-1/2
109-007	600-007	1-3/8-12 L.H.	1-1/4 -1-1/2

Nylon Seal for Jacobs Taper, Double Angle Collet Chucks

IMPERIAL

JT2 • JT33

▶View All Nylon Seal for Jacobs Taper, Double Angle Collet Chucks Part Numbers2 items

Part Number	Old Part Number	Description
110-001	831-012	Fits JT2-DA10-CGS-2
110-002	831-013	Fits JT33-DA18-CGS-2

Bushings & Reducing Sleeves

Coolant-Fed Lathe Bushing

IMPERIAL

INCH & METRIC | 1/4-18 NPT COOLANT ENTRY PORT

Note: These coolant-fed lathe bushings adapt easily to any lathe, allowing the use of a variety of coolant-fed tooling in machines that currently lack rear entry coolant capabilities. The coolant enters thru a coolant entry port, travels parallel to the bushing and flows to the end of the cutting tool. (Most commonly used with spade drills and indexable drills.)

▶View All Coolant-Fed Lathe Bushing Part Numbers22 items

Inch

Part Number	A	B	C
948-005	0.750	1.4995	2-3/4
948-010	0.875	1.4995	2-3/4
948-015	1.000	2.4995	3-3/8
948-020	1.000	1.9995	3-1/8
948-025	1.250	1.9995	3-1/8
948-030	1.250	2.4995	3-3/8
948-035	1.500	1.9995	3-3/8
948-040	1.500	2.4995	3-3/8
948-045	1.750	2.4995	3-7/8
948-050	2.000	2.4995	3-7/8

Metric

Part Number	A	B	C
M948-005	0.7874 (20mm)	1.2593	2-3/4
M948-010	0.7874 (20mm)	1.4995	2-3/4
M948-015	0.9842 (25mm)	1.9995	3-1/8
M948-020	0.9842 (25mm)	2.4995	3-3/8
M948-025	1.2598 (32mm)	1.9680	3-1/8
M948-030	1.2598 (32mm)	1.9995	3-1/8
M948-035	1.2598 (32mm)	2.4995	3-3/8
M948-040	1.5748 (40mm)	1.9680	3-3/8
M948-045	1.5748 (40mm)	1.9995	3-3/8
M948-050	1.5748 (40mm)	2.4995	3-3/8
M948-055	1.9685 (50mm)	2.4995	3-7/8
M948-060	0.7874 (20mm)	1.2500	2-3/4

Morse Taper Reducing Sleeve with Coolant Cross Holes

IMPERIAL

INSIDE TAPER 1 – 4 • OUTSIDE TAPER 2 – 5

▶View All Morse Taper Reducing Sleeve with Coolant Cross Holes Part Numbers8 items

Part Number	(A) Inside Taper	(B) Outside Taper
842-001	1	2
842-002	1	3
842-003	2	3
842-004	2	4
842-005	3	4
842-006	2	5
842-007	3	5
842-008	4	5

Morse Taper Reducing Sleeve without Coolant Cross Holes

IMPERIAL

INSIDE TAPER 3 – 4 • OUTSIDE TAPER 4 – 5

▶View All Morse Taper Reducing Sleeve without Coolant Cross Holes Part Numbers3 items

Part Number	(A) Inside Taper	(B) Outside Taper
843-001	3	4
843-002	3	5
843-003	4	5

End Mill Reducing Coolant Bushing

IMPERIAL

A 1-1/4 – 2 • B 0.748 – 1-3/4

▶View All End Mill Reducing Coolant Bushing Part Numbers11 items

Part Number	A	B	C	D	E	F
949-010	2	1-3/4	3-3/8	1-3/8	1-3/8	2-1/4
949-012	2	1-1/2	3-3/8	1-3/8	1-3/8	2-1/4
949-014	2	1-1/4	3-3/8	1-3/8	1-3/8	2-1/4
949-016	2	1.000	3-3/8	1-3/8	1-3/8	2-1/4
949-018	1-1/2	1-1/2	3	1-1/8	1	1-3/4
949-020	1-1/2	1.000	3	1-1/8	1	1-3/4
949-0787	1-1/4	0.787	3	1	1-1/8	1-5/8
949-0984	1-1/4	0.984	3	1	1-1/8	1-1/2
949-1259	1-1/2	1.259	3	1	1-1/8	2
949-1579	2	1.579	3-3/8	1-3/8	1-3/8	2-3/8
949-0748	1-1/4	0.748	3	1	1-1/8	1-1/2

Shell Mill Hardware

Drive Keys for Shell Mill Holders

IMPERIAL

SIZE 0.500 – 2.500

▶View All Drive Keys for Shell Mill Holders Part Numbers7 items

Part Number	Size	A	B	C	D
201-001	0.500	0.250	0.50	0.12	0.2510
201-002	0.750	0.312	0.53	0.15	0.3135
201-003	1.000	0.375	0.68	0.18	0.3760
201-004	1.250	0.500	0.88	0.25	0.5010
201-005	1.500	0.625	1.06	0.31	0.6260
201-006	2.000	0.750	1.12	0.38	0.7510
201-007	2.500	1.000	1.38	0.50	1.0015

Arbor Screw for Shell Mill Holders

IMPERIAL

PILOT DIA. 0.50 – 2.50

▶View All Arbor Screw for Shell Mill Holders Part Numbers12 items

Part Number	Old Part Number	Pilot Dia.	Size Thread	OAL
200-001	959-001	0.50	1/4-28	0.75
200-002	959-002	0.75	3/8-24	0.94
200-003	959-003	1.00	1/2-20	1.12
*200-004	959-103	1.00	1/2-20	1.87
200-005	959-004	1.25	5/8-18	1.25
*200-006	959-104	1.25	5/8-18	2.00
200-007	959-005	1.50	3/4-16	1.50
*200-008	959-105	1.50	3/4-16	2.00
200-009	959-006	2.00	1”-14	1.68
*200-010	959-106	2.00	1”-14	2.18
200-011	959-007	2.50	1”-14 Head	3.12
*200-012	959-107	2.50	1”-14 Head	2.18

*Note: Longer length screws needed when Coolant Style Shell Mills are used with Non-Coolant Shell Mill Adapters.

Slotted Cap Screws for Shell Mill Arbors

IMPERIAL

THREAD 1/4-28 – 1-14

▶View All Slotted Cap Screws for Shell Mill Arbors Part Numbers7 items

Part Number	Old Part No.	A	B	C	D	E
113-001	959-042	0.62	0.75	0.25	1/4-28	0.38
113-002	959-043	0.88	0.94	0.31	3/8-24	0.56
113-003	959-044	1.18	1.12	0.31	1/2-20	0.88
113-004	959-045	1.50	1.25	0.31	5/8-18	0.94
113-005	959-046	1.88	1.50	0.38	3/4-16	1.18
113-006	959-047	2.50	1.68	0.38	1-14	1.68
113-007	959-048	3.12	1.68	0.38	1-14	1.68

Wrenches for Slotted Cap Screws

IMPERIAL

FOR 113 SERIES SLOTTED CAP SCREWS

▶View All Wrenches for Slotted Cap Screws Part Numbers6 items

Part Number	Old Part No.	A	B	C	D
114-001	959-049	0.62	2.25	4	0.18
114-002	959-050	0.88	2.03	5	0.25
114-003	959-051	1.18	2.18	6	0.31
114-004	959-052	1.50	2.38	7	0.38
114-005	959-053	1.88	2.50	7	0.50
114-006	959-054	2.50	2.50	7	0.62

Nosepieces, ER Nuts & Wrenches

Compression Nosepiece for Double Angle Collet Chucks

IMPERIAL

DA10 • DA18 | HEX

▶View All Compression Nosepiece for Double Angle Collet Chucks Part Numbers2 items

Part Number	Old Part Number	Size
111-DA10	509-100	1-1/4 Hex
111-DA18	589-189	1-1/2 Hex

Compression Nosepiece for Straight Shank Collet Extensions

IMPERIAL

SDA30 • SDA20 • SDA10 • SDA18 | HEX

▶View All Compression Nosepiece for Straight Shank Collet Extensions Part Numbers4 items

Part Number	Old Part Number	Size
111-SDA30	961-539	1/2 Hex
111-SDA20	961-529	11/16 Hex
111-SDA10	961-509	7/8 Hex
111-SDA18	961-589	1-3/16 Hex

Compression Nosepiece for Single Angle Collet Chucks

IMPERIAL

TG10 • TG15 | HEX & SPANNER

▶View All Compression Nosepiece for Single Angle Collet Chucks Part Numbers3 items

Part Number	Old Part Number	Size
111-TG10H	500-101	2-1/4 Hex
111-TG10S	500-100	2-1/2 Spanner
111-TG15S	550-150	3-1/2 Spanner

ER Clamping Nut

IMPERIAL

ER 16 • ER 20 • ER 32

▶View All ER Clamping Nut Part Numbers3 items

Part Number	Type	A	B	C
115-015	ER 16	1.109	M22 X 1.5	0.672
115-016	ER 20	1.344	M25 X 1.5	0.750
115-017	ER 32	1.968	M40 X 1.5	0.875

Spanner Wrenches

IMPERIAL

PIN • ADJUSTABLE HOOK • HOOK

▶View All Spanner Wrenches Part Numbers6 items

Part Number	Old Part Number	Size	Style
112-001	959-458	2-1/2	Pin
112-002	959-461	3-1/4	Pin
112-003	959-472	1-1/4 to 3	Adj. Hook
112-004	959-462	4-1/2	Pin
112-010	959-471	3/4 to 2	Adj. Hook
112-011	959-474	2 to 4-1/2	Adi. Hook

ER-Wrench

IMPERIAL

ER-16 / ER-20 • ER-32

▶View All ER-Wrench Part Numbers3 items

Part Number	Type	A	B
112-102	ER 16	1.656	5.500
112-103	ER 20	2.375	5.312
112-106	ER 32	2.937	9.875

High Pressure Air-Operated Pumping System • Up to 1,000 PSI / 10 GPM

CFT Model 1000 High Pressure Air-Operated Pumping System

NEW

COOLANT PRESSURE UP TO 1,000 PSI • COOLANT VOLUME UP TO 10 GPM | ADAPTABLE TO MOST MACHINES / HEAVY DUTY, STAIN RESISTANT CABINET

Easy to maintain
Small 2’ x 2’ footprint
100% guaranteed performance
Custom Length Hoses Available on Request
Different Voltage Solenoids Available on Request

Basic System Includes

Pump
110V AC Solenoid
Standard Length Air Inlet Hose and Fittings
Standard Length Low Pressure Coolant Inlet Hose, Fittings, and Sump Filter
Standard Length High Pressure Coolant Output Hose & Fittings
Dual 100 Mesh and 200 Mesh Filters

Retention Knobs & Sockets

Looking for Retention Knobs?

CV flange, BT flange and DIN / ISO flange retention knobs and retention knob sockets have their own page: Retention Knobs & Sockets →

Take the Accessories Catalog With You

Get the complete printable PDF — specs, dimensions and every part number — sent straight to your inbox.

Download the PDF →