Coolant-Fed Taps

Download the Full Coolant-Fed Tap Catalog

Every thread size, drill chart and part number in one printable PDF — plus the coolant-fed tooling lines not shown on this page.

Get the Free PDF →
Coolant-Fed Taps for Thru Hole • Medium Hook • Spiral Point Plug

Thru Hole Taps – Medium Hook • Spiral Point Plug

THREAD

COOLANT-FED • SPIRAL POINT • PLUG CHAMFER | SIZES 1/4-20 NC – 1″-12 NF

Medium Hook for the following material groups: Medium & Low Carbon Steel to 23 Rc, Ductile Iron, Brass, Bronze, & Thermo Plastic.

Note: Standard Thru Hole Application Taps are designed to flush chips from the work hole per angled coolant holes along the tap flutes. This flushing / cooling action removes chips from the lead thread of the tap keeping chips from hindering the cutting action of the tap.

▶View All Thru Hole Medium Hook Sizes & Part Numbers20 sizes
SizeThread LimitNo. of FlutesPart No. — Plug Chamfer
1/4-20 NCH-33325-025M
1/4-28 NFH-33325-045M
5/16-18 NCH-33331-025M
5/16-24 NFH-33331-045M
3/8-16 NCH-33337-025M
3/8-24 NFH-33337-045M
7/16-14 NCH-34343-025M
7/16-20 NFH-34343-045M
1/2-13 NCH-34350-025M
1/2-20 NFH-34350-045M
9/16-12 NCH-34356-025M
9/16-18 NFH-34356-045M
5/8-11 NCH-34362-025M
5/8-18 NFH-34362-045M
3/4-10 NCH-34375-025M
3/4-16 NFH-34375-045M
7/8-9 NCH-44387-025M
7/8-14 NFH-44387-045M
1″-8 NCH-44399-025M
1″-12 NFH-44399-045M

Premium High Speed Steel — Bright Finish.

Note: Other surface treatments available upon request.

See our Tapping Systems section for Tap Holders & Adapters.

Coolant-Fed Taps for Thru Hole • High Hook • Spiral Point Plug

Thru Hole Taps – High Hook • Spiral Point Plug

THREAD

COOLANT-FED • SPIRAL POINT • PLUG CHAMFER | SIZES 1/4-20 NC – 1″-12 NF

High Hook for the following material groups: Stainless, Titanium, Monel, Aluminum Alloys, Copper, Manganese Bronze, Magnesium, & Zinc.

Note: Standard Thru Hole Application Taps are designed to flush chips from the work hole per angled coolant holes along the tap flutes. This flushing / cooling action removes chips from the lead thread of the tap keeping chips from hindering the cutting action of the tap.

▶View All Thru Hole High Hook Sizes & Part Numbers20 sizes
SizeThread LimitNo. of FlutesPart No. — Plug Chamfer
1/4-20 NCH-33325-025H
1/4-28 NFH-33325-045H
5/16-18 NCH-33331-025H
5/16-24 NFH-33331-045H
3/8-16 NCH-33337-025H
3/8-24 NFH-33337-045H
7/16-14 NCH-34343-025H
7/16-20 NFH-34343-045H
1/2-13 NCH-34350-025H
1/2-20 NFH-34350-045H
9/16-12 NCH-34356-025H
9/16-18 NFH-34356-045H
5/8-11 NCH-34362-025H
5/8-18 NFH-34362-045H
3/4-10 NCH-34375-025H
3/4-16 NFH-34375-045H
7/8-9 NCH-44387-025H
7/8-14 NFH-44387-045H
1″-8 NCH-44399-025H
1″-12 NFH-44399-045H

Premium High Speed Steel — Bright Finish.

Note: Other surface treatments available upon request.

See our Tapping Systems section for Tap Holders & Adapters.

Coolant-Fed Taps for Blind Hole • Medium Hook • 4 Flute Bottom

Blind Hole Taps – Medium Hook • 4 Flute Bottom

THREAD

COOLANT-FED • 4 FLUTE • PLUG & BOTTOM CHAMFER | SIZES 1/4-20 NC – 1″-12 NF

Medium Hook for the following material groups: Medium & Low Carbon Steel to 23 Rc, Ductile Iron, Brass, Bronze, & Thermo Plastic.

Note: Standard Blind Hole Application Taps are designed to evacuate chips along the flutes from the blind hole. These taps have a thru hole in the center, where the coolant forces the chips out through the flutes of the tap in order to keep chips from hindering the cutting action of the tap.

▶View All Blind Hole Medium Hook Sizes & Part Numbers20 sizes
SizeThread LimitPart No. — Plug ChamferPart No. — Bottom Chamfer
1/4-20 NCH-3325-125M325-120M
1/4-28 NFH-3325-145M325-140M
5/16-18 NCH-3331-125M331-120M
5/16-24 NFH-3331-145M331-140M
3/8-16 NCH-3337-125M337-120M
3/8-24 NFH-3337-145M337-140M
7/16-14 NCH-3343-125M343-120M
7/16-20 NFH-3343-145M343-140M
1/2-13 NCH-3350-125M350-120M
1/2-20 NFH-3350-145M350-140M
9/16-12 NCH-3356-125M356-120M
9/16-18 NFH-3356-145M356-140M
5/8-11 NCH-3362-125M362-120M
5/8-18 NFH-3362-145M362-140M
3/4-10 NCH-3375-125M375-120M
3/4-16 NFH-3375-145M375-140M
7/8-9 NCH-4387-125M387-120M
7/8-14 NFH-4387-145M387-140M
1″-8 NCH-4399-125M399-120M
1″-12 NFH-4399-145M399-140M

Premium High Speed Steel — Bright Finish.

Note: Other surface treatments available upon request.

See our Tapping Systems section for Tap Holders & Adapters.

Coolant-Fed Taps for Blind Holes • High Hook • 4 Flute Bottom

Blind Hole Taps – High Hook • 4 Flute Bottom

THREAD

COOLANT-FED • 4 FLUTE • PLUG & BOTTOM CHAMFER | SIZES 1/4-20 NC – 1″-12 NF

High Hook for the following material groups: Stainless, Titanium, Monel, Aluminum Alloys, Copper, Manganese Bronze, Magnesium, & Zinc.

Note: Standard Blind Hole Application Taps are designed to evacuate chips along the flutes from the blind hole. These taps have a thru hole in the center, where the coolant forces the chips out through the flutes of the tap in order to keep chips from hindering the cutting action of the tap.

▶View All Blind Hole High Hook Sizes & Part Numbers20 sizes
SizeThread LimitPart No. — Plug ChamferPart No. — Bottom Chamfer
1/4-20 NCH-3325-125H325-120H
1/4-28 NFH-3325-145H325-140H
5/16-18 NCH-3331-125H331-120H
5/16-24 NFH-3331-145H331-140H
3/8-16 NCH-3337-125H337-120H
3/8-24 NFH-3337-145H337-140H
7/16-14 NCH-3343-125H343-120H
7/16-20 NFH-3343-145H343-140H
1/2-13 NCH-3350-125H350-120H
1/2-20 NFH-3350-145H350-140H
9/16-12 NCH-3356-125H356-120H
9/16-18 NFH-3356-145H356-140H
5/8-11 NCH-3362-125H362-120H
5/8-18 NFH-3362-145H362-140H
3/4-10 NCH-3375-125H375-120H
3/4-16 NFH-3375-145H375-140H
7/8-9 NCH-4387-125H387-120H
7/8-14 NFH-4387-145H387-140H
1″-8 NCH-4399-125H399-120H
1″-12 NFH-4399-145H399-140H

Premium High Speed Steel — Bright Finish.

Note: Other surface treatments available upon request.

See our Tapping Systems section for Tap Holders & Adapters.

Reference Charts

Standard Plug & Bottom Tap Dimensions

DIMENSIONAL REFERENCE | SIZES 1/4″ – 1″ INCH

▶View Standard Plug & Bottom Tap Dimensions10 sizes
Size (In.)Metric SizeOverall Length (In.)Thread Length (In.)Square Length (In.)Shank Dia. (In.)Oil Hole (In.)
1/4M62-1/25/85/160.2550.040
5/16M82-23/3211/163/80.3180.052
3/8M102-15/163/47/160.3810.063
7/16–3-5/327/813/320.3230.070
1/2M123-3/815/167/160.3670.081
9/16–3-19/3211/20.4290.094
5/8–3-13/161-3/329/160.4800.102
3/4–4-1/41-7/3211/160.5900.126
7/8–4-11/161-11/323/40.6970.141
1–5-1/81-1/213/160.8000.161

Tap Drill Size Chart – Stock Size Drills

TAP DRILL SIZES & THEORETICAL PERCENTAGE OF THREAD

▶View Tap Drill Size Chart56 sizes
TapTap DrillDecimal Equivalent of Tap DrillTheoretical % of Thread
1/4-2090.196083
80.199079
70.201075
13/640.203172.5
60.204071
50.205569
40.209063
1/4-2830.213080
7/320.218867
20.221063
5/16-18F0.257077
G0.261071
17/640.265665
H0.266064
5/16-24H0.266086
I0.272075
J0.277066
3/8-165/160.312577
O0.316073
P0.323064
3/8-2421/640.328187
Q0.332079
R0.339067
7/16-14T0.358086
23/640.359484
U0.368075
3/80.375067
V0.377065
7/16-20W0.386079
25/640.390672
X0.397062
1/2-1327/640.421978
7/160.437563
1/2-2029/640.453172
9/16-1215/320.468887
31/640.484472
9/16-181/20.500087
33/640.515665
5/8-1117/320.531279
35/640.546966
5/8-189/160.562587
37/640.578165
3/4-1041/640.640684
21/320.656272
3/4-1611/160.687577
7/8-949/640.765676
25/320.781265
7/8-1451/640.796984
13/160.812567
1″-855/640.859487
7/80.875077
57/640.890667
29/320.906258
1″-1229/320.906287
59/640.921972
15/160.937558

Tap Drill Size Formulas

Drilled Hole Size = Major Diameter of Thread − (0.01299 × amount of % of full thread) ÷ Threads Per Inch
% of Full Thread = Threads Per Inch × (Major Dia. of Thread − Tap Drill Diameter) ÷ 0.01299

Suggested Process for Tapping Difficult to Machine Materials

When tapping difficult to machine materials (such as Inconel, 17-4 pH Stainless, and Hastelloy), the following processing has been used to insure consistency of the final threads and longer tap life:

  1. Drill the hole using a slightly undersized tap drill.
  2. Bore the hole to the largest allowable diameter to achieve specified percentage of thread, using a 2 flute end mill.
  3. Tap the hole.

While this adds an extra step to the process, this has been used successfully and may be a viable option.

Special Coolant-Fed Taps

The George Whalley Co. can provide a full range of special coolant-fed taps to meet your tapping requirements.

Our Capabilities Include

  • Special Premium Steel
  • Special Diameter & Pitches
  • Metrics
  • Right & Left Hand
  • Straight Flute
  • Pipe Taps
  • Extension Taps
  • Pulley Taps
  • Blue Print Specials
  • Full Range of Surface Treatments

Please Specify

  1. Nominal diameter (inch or metric)
  2. Number of threads per inch (or metric pitch)
  3. Class of fit or pitch diameter tolerance
  4. Direction of cut (right or left hand)
  5. Type of tap (straight flute)
  6. Style (taper, plug or bottoming)
  7. Coolant passage (thru center of tap)
  8. Material to be tapped

Please Note: For many special application coolant-fed taps we can best serve you when provided with a sample part, blue print and a sample of the tap you are currently using.

Take the Tap Catalog With You

Get the complete printable PDF — specs, dimensions and every part number — sent straight to your inbox.

Download the PDF →