Coolant-Fed Reamers

Download the Full Reamer & T-Slot Cutter Catalog

Every size, tolerance and part number in one printable PDF — plus the coolant-fed tooling lines not shown on this page.

Get the Free PDF →
Chucking Reamers • M42 Cobalt Steel • Straight Shank

Series 607 – Coolant-Fed Chucking Reamer

IMPERIAL

M42 COBALT STEEL • STRAIGHT SHANK | SIZES 5/16″ – 1″ INCH

  • One Coolant Hole Per Flute
  • M42 Cobalt High Speed Steel
  • Staggered Coolant Holes for Maximum Strength
  • Straight Flute
  • For Thru or Blind Holes
  • R.H. Cut

Tolerances

5/16″ – 1/2″ dia.+ .0002″ / -.0000″
17/32″ – 5/8″ dia.+ .0003″ / -.0000″
21/32″ – 1″ dia.+ .0005″ / -.0000″
▶View All 607 Sizes & Part Numbers23 sizes
Dia. (Inch)Decimal (In.)No. of FlutesFlute (In.)OAL (In.)Shank Dia. (In.)Part Number
* 5/160.312561-1/260.2792607-013
* 11/320.343861-1/260.2792607-015
* 3/80.375061-3/470.3105607-017
* 13/320.406261-3/470.3105607-019
* 7/160.437561-3/470.3750607-021
* 15/320.468861-3/470.3750607-023
* 1/20.50006280.4355607-025
* 17/320.53126280.4355607-027
* 9/160.56256280.4355607-029
* 19/320.59386280.4355607-031
* 5/80.625062-1/490.5620607-033
* 21/320.656282-1/490.6520607-035
* 11/160.687582-1/490.5620607-037
* 23/320.718882-1/490.5620607-039
* 3/40.750082-1/29-1/20.6245607-041
* 25/320.781282-1/29-1/20.6245607-043
* 13/160.812582-1/29-1/20.6245607-045
* 27/320.843882-1/29-1/20.6245607-047
* 7/80.875082-5/8100.7495607-049
* 29/320.906282-5/8100.7495607-051
* 15/160.937582-5/8100.7495607-053
* 31/320.968882-5/8100.7495607-055
* 11.000082-3/410-1/20.8745607-057

* Outgoing Items

Additional Specifications for Series 607 & S607 — End Entry Feeds: 0.2969″ to 0.6249″, Cupped End Coolant Entry • 0.6251″ to 0.7187″, 1/8 NPT Tapped Coolant Entry • 0.7501″ to 0.9999″, 1/4 NPT Tapped Coolant Entry.

Chucking Reamers • Special Decimal Size • M42 Cobalt Steel • Straight Shank

Series S607 – Coolant-Fed Special Decimal Size Chucking Reamer

IMPERIAL

SPECIAL DECIMAL SIZE • M42 COBALT STEEL • STRAIGHT SHANK | SIZES 0.2969″ – 0.9999″ INCH

  • M42 Cobalt High Speed Steel
  • Straight Flute
  • Staggered Coolant Holes for Maximum Strength
  • For Thru or Blind Holes
  • One Coolant Hole Per Flute
  • R.H. Cut

Tolerances

.2969″ – .4999″ dia.+ .0002″ / -.0000″
.5001″ – .6249″ dia.+ .0003″ / -.0000″
.6251″ – .999″ dia.+ .0005″ / -.0000″
▶View All S607 Sizes & Part Numbers23 sizes
Decimal Range (In.)No. of FlutesFlute (In.)OAL (In.)Shank Dia. (In.)Part Number
* 0.2969-0.312561-1/260.2792S607-*-01
* 0.3126-0.343761-1/260.2792S607-*-02
* 0.3439-0.374961-3/470.3105S607-*-03
* 0.3751-0.406161-3/470.3105S607-*-04
* 0.4063-0.437461-3/470.3730S607-*-05
* 0.4376-0.468761-3/470.3750S607-*-06
* 0.4689-0.49996280.4355S607-*-07
* 0.5001-0.53116280.4355S607-*-08
* 0.5313-0.56246280.4355S607-*-09
* 0.5626-0.59376280.4355S607-*-10
* 0.5938-0.624962-1/490.5620S607-*-11
* 0.6251-0.656182-1/490.5620S607-*-12
* 0.6563-0.687482-1/490.5620S607-*-13
* 0.6876-0.718782-1/490.5620S607-*-14
* 0.7189-0.749982-1/29-1/20.6245S607-*-15
* 0.7501-0.781182-1/29-1/20.6245S607-*-16
* 0.7813-0.812482-1/29-1/20.6245S607-*-17
* 0.8126-0.843782-1/29-1/20.6245S607-*-18
* 0.8439-0.874982-5/8100.7495S607-*-19
* 0.8751-0.906182-5/8100.7495S607-*-20
* 0.9062-0.937482-5/8100.7495S607-*-21
* 0.9376-0.968782-5/8100.7495S607-*-22
* 0.9689-0.999982-3/410-1/20.8745S607-*-23

* Outgoing Items

Note: When ordering Series S607 reamers, specify the exact decimal size required in the place where the asterisk is shown. For example, to order a 0.6820 diameter reamer use S607-6820-13.

Additional Specifications for Series 607 & S607 — End Entry Feeds: 0.2969″ to 0.6249″, Cupped End Coolant Entry • 0.6251″ to 0.7187″, 1/8 NPT Tapped Coolant Entry • 0.7501″ to 0.9999″, 1/4 NPT Tapped Coolant Entry.

Chucking Reamers • C-2 Carbide Tipped • Straight Shank

Series 606 – Coolant-Fed Carbide Tipped Chucking Reamer

IMPERIAL

C-2 CARBIDE TIPPED • STRAIGHT SHANK | SIZES 9/16″ – 1-1/16″ INCH

  • One Coolant Hole Per Flute
  • Straight Flute
  • Staggered Coolant Holes for Maximum Strength
  • R.H. Cut

Tolerances

9/16″ – 5/8″ dia.+ .0003″ / -.0000″
11/16″ – 1″ dia.+ .0005″ / -.0000″
▶View All 606 Sizes & Part Numbers16 sizes
Dia. (Inch)Decimal (In.)No. of FlutesFlute (In.)OAL (In.)Shank Dia. (In.)Part Number
9/160.56256287/16606-029
19/320.59386287/16606-031
5/80.625062-1/499/16606-033
21/320.656262-1/499/16606-035
11/160.687562-1/499/16606-037
23/320.718862-1/499/16606-039
3/40.750062-1/29-1/25/8606-041
25/320.781262-1/29-1/25/8606-043
13/160.812562-1/29-1/25/8606-045
27/320.843862-1/29-1/25/8606-047
7/80.875062-5/8103/4606-049
29/320.906262-5/8103/4606-051
15/160.987582-5/8103/4606-053
31/320.968882-5/8103/4606-055
11.000082-3/410-1/27/8606-057
1-1/161.062582-3/410-1/27/8606-059

Additional Specifications for Series 606 & S606 — End Entry Feeds: 0.5469″ to 0.6249″, Cupped End Coolant Entry • 0.6251″ to 0.7187″, 1/8 NPT Tapped Coolant Entry • 0.7501″ to 1.0625″, 1/4 NPT Tapped Coolant Entry.

Chucking Reamers • Special Decimal Size • C-2 Carbide Tipped • Straight Shank

Series S606 – Coolant-Fed Special Decimal Size Carbide Tipped Reamer

IMPERIAL

SPECIAL DECIMAL SIZE • C-2 CARBIDE TIPPED • STRAIGHT SHANK | SIZES 0.5469″ – 1.0625″ INCH

  • One Coolant Hole Per Flute
  • Straight Flute
  • Staggered Coolant Holes for Maximum Strength
  • R.H. Cut

Tolerances

.5469″ – .6562″ dia.+ .0003″ / -.0000″
.6563″ – 1.0625″ dia.+ .0005″ / -.0000″
▶View All S606 Sizes & Part Numbers16 sizes
Decimal Range (In.)No. of FlutesFlute (In.)OAL (In.)Shank Dia. (In.)Part Number
0.5469-0.56256287/16S606-*-01
0.5626-0.59386287/16S606-*-02
0.5939-0.625062-1/499/16S606-*-03
0.6251-0.656262-1/499/16S606-*-04
0.6563-0.687562-1/499/16S606-*-05
0.6876-0.718862-1/499/16S606-*-06
0.7189-0.750062-1/29-1/25/8S606-*-07
0.7501-0.781262-1/29-1/25/8S606-*-08
0.7813-0.812562-1/29-1/25/8S606-*-09
0.8126-0.843862-1/29-1/25/8S606-*-10
0.8439-0.875062-5/8103/43606-*-11
0.8751-0.906262-5/8103/4S606-*-12
0.9063-0.937582-5/8103/4S606-*-13
0.9376-0.968882-5/8103/4S606-*-14
0.9689-1.000082-3/410-1/27/8S606-*-15
1.0001-1.062582-3/410-1/27/8S606-*-16

Note: When ordering Series S606 reamers, specify the exact decimal size required in the place where the asterisk is shown. For example, to order a 0.5470 diameter reamer use S606-5470-01.

Additional Specifications for Series 606 & S606 — End Entry Feeds: 0.5469″ to 0.6249″, Cupped End Coolant Entry • 0.6251″ to 0.7187″, 1/8 NPT Tapped Coolant Entry • 0.7501″ to 1.0625″, 1/4 NPT Tapped Coolant Entry.

Heat Exchanger Reamers • M42 Cobalt Steel • Taper Shank

Series 608 – Coolant-Fed Heat Exchanger Reamer

IMPERIAL

M42 COBALT STEEL • TAPER SHANK | SIZES 9/16″ – 1-1/16″ INCH

  • Staggered coolant holes for maximum strength
  • M42 Cobalt High Speed
  • Dual Coolant Entry: Removable tang end plug or side entry morse taper
  • 15º Left-Hand Spiral
  • Left hand spiral flutes for ease of chip ejection & excellent finish
  • R.H. Cut
  • Designed for deep hole applications
  • Two coolant holes per flute

Tolerances

9/16″ – 5/8″ dia.+ .0003″ / -.0001″
21/32″ – 1″ dia.+ .0005″ / -.0000″
1-1/16″ dia.+ .0006″ / -.0002″
▶View All 608 Sizes & Part Numbers16 sizes
Dia. (In.)Decimal (In.)No. of FlutesFlute (In.)OAL (In.)ShankPart Number
9/160.562566143MT608-021
19/320.593866143MT608-023
5/80.625066143MT608-025
21/320.656286143MT608-027
11/160.687586143MT608-029
23/320.718886143MT608-031
3/40.750086143MT608-033
25/320.781286143MT608-035
13/160.812586143MT608-037
27/320.843886143MT608-039
7/80.875086143MT608-041
29/320.906286143MT608-043
15/160.937586143MT608-045
31/320.968886143MT608-047
11.000086143MT608-049
1-1/161.062586143MT608-051
Heat Exchanger Reamers • Special Decimal Size • M42 Cobalt Steel • Taper Shank

Series S608 – Coolant-Fed Special Decimal Size Heat Exchanger Reamer

IMPERIAL

SPECIAL DECIMAL SIZE • M42 COBALT STEEL • TAPER SHANK | SIZES 0.5469″ – 1.0625″ INCH

  • Dual Coolant Entry: Removable tang end plug or side entry morse taper
  • M42 Cobalt High Speed
  • Left hand spiral flutes for ease of chip ejection & excellent finish
  • 15º Left-Hand Spiral
  • Designed for deep hole applications
  • R.H. Cut
  • Staggered coolant holes for maximum strength
  • Two coolant holes per flute

Tolerances

.5469″ – .6562″ dia.+ .0003″ / -.0001″
.6563″ – 1.0000″ dia.+ .0005″ / -.0000″
1.001″ – 1.0625″ dia.+ .0006″ / -.0002″
▶View All S608 Sizes & Part Numbers16 sizes
Decimal Range (In.)No. of FlutesFlute (In.)OAL (In.)ShankPart Number
0.5469-0.562566143MTS608-*-01
0.5626-0.593866143MTS608-*-02
0.5939-0.625066143MTS608-*-03
0.6251-0.656286143MTS608-*-04
0.6563-0.687586143MTS608-*-05
0.6876-0.718886143MTS608-*-06
0.7189-0.750086143MTS608-*-07
0.7501-0.781286143MTS608-*-08
0.7813-0.812586143MTS608-*-09
0.8126-0.843886143MTS608-*-10
0.8439-0.875086143MTS608-*-11
0.8751-0.906286143MTS608-*-12
0.9063-0.937586143MTS608-*-13
0.9376-0.968886143MTS608-*-14
0.9689-1.000086143MTS608-*-15
1.0001-1.062586143MTS608-*-16

Note: When ordering Series S608 reamers, specify the exact decimal size required in the place where the asterisk is shown. For example, to order a 0.5469 diameter reamer use S608-5469-01.

T-Slot Cutters • Super Cobalt Steel

Series 810 – Coolant-Fed T-Slot Cutter

IMPERIAL

SUPER COBALT STEEL | SIZES 3/8″ – 1-1/2″ INCH | PATENT NO. 3,597,817

Because of the greater speed and feed capabilities, production rates when cutting T-slots are improved from 2 to 5 times.

The coolant pressure forces chips ahead of the cutter. Since the cutter need not be backed out to remove impact chips, a T-slot can be cut in one pass.

With coolant brought right to the cutting edge, the tool is kept cool at all times, extending its life. This also lubricates the cutting edge to eliminate galling, to minimize recutting chips and to facilitate chip removal.

The final result is a T-slot with a better finish and closer tolerances, produced more quickly with less wear on the tool.

▶View All 810 Sizes & Part Numbers7 sizes
Part NumberOld Part NumberBolt Size (In.)Diameter of Cutter (In.)Thickness of Cutter (In.)Diameter of Neck (In.)Overall Length (In.)Shank Dia. (In.)Undercut Length (In.)No. Flutes
810-001OTC-33/825/3221/6413/323-1/43/455/646
810-002OTC-41/231/3225/6417/323-7/163/463/646
810-003OTC-55/81-1/431/6421/323-15/1611-9/646
810-004OTC-63/41-15/325/825/324-7/1611-1/28
810-005OTC-711-27/3253/641-1/324-13/161-1/41-43/648
810-006OTC-81-1/42-7/321-3/321-7/325-3/81-1/41-31/328
810-007OTC-91-1/22-21/321-11/321-17/325-29/321-1/42-1/810

* Outgoing Items

Special Coolant-Fed Cutting Tools

Our experienced tooling engineers will provide quotes on special tooling per your specifications. Some of the more popular materials and special tools are listed below. Fax your special tooling requests to us at (216) 481-9966 or e-mail them to: sales@coolantfedtooling.com.

Materials

  • High Speed
  • Cobalt
  • Solid Carbide
  • Carbide Tipped

Special Tools

  • Porting Tools
  • Combination Tools
  • Step Drills
  • Fluted Milling Tools
  • Forming Tools
  • Dovetail Cutters
  • Conventional & Special Shanks

Take the Reamer Catalog With You

Get the complete printable PDF — specs, dimensions and every part number — sent straight to your inbox.

Download the PDF →