Download the Full VelociFlow™ Pump Catalog
Every size, dimension and part number in one printable PDF — plus the coolant-fed tooling lines not shown on this page.
Increase Volume And Pressure Of Coolant Flow.
The VelociFlow™ High Pressure Electric Coolant Pump safely and efficiently pumps coolant into your machine tool, increasing volume and pressure for coolant-fed tooling applications. This high pressure cooling system can dramatically improve speeds and feeds without damage to the machine tool, the part, or tooling.
- 10 GPM @ 1000 PSI
- Dual 10 Micron Filters
- 230 VAC or 440 VAC
- Machines up to 25 HP
- 40 or 50 Taper Mills
Why High Pressure Coolant
High pressure cooling systems outperform conventional flood cooling:
- Increased production efficiencies
- Longer tool life
- Improved surface finishes
- Better chip evacuation
- Swift, smooth flow of coolant to the cutting zone
The VelociFlow™ is the simplest, most economical way to maximize the full capability of advanced, coolant-fed tooling:
- Minimal maintenance
- Small footprint (19-5/8” W x 39-7/16” D)
- Completely self-contained
- Compatible with most high-quality coolants, both oil and synthetic mixtures
- Adaptable to coolant through the spindle, exterior flushing, and coolant rotary inducer
- Automatic overload protection
- Equipped with a dirty filter alarm circuit
VelociFlow™ Model 2500E Technical Information
HIGH PRESSURE ELECTRIC COOLANT PUMP FOR MACHINE TOOLS
The VelociFlow™ is pressure-fed by the standard onboard transfer pump, through the filter vessel, to the inlet of the positive displacement pump.
- 10 gpm @ 1000 psi
- Dual pleated filters (10 Micron)
- Single “m” code controlled outlet
- Turret index signal
▶View Standard Features & Requirements10 features
Standard Features
| Features | VelociFlow™ Model 2500E |
|---|---|
| Max gpm | 10 gpm |
| Max Pressure | 1000 psi |
| Run Dry Pump | Standard |
| Transfer Pump | Standard |
| Single Filter | N/A |
| Dual Filters | Standard |
| Single Outlet | Standard |
| Adjustable Bar Valve | Standard |
| Error Signal Output | Standard |
| Dirty Filter Alarm Panel Light | Standard |
M Code Requirement: A set of spare latching “m” codes will be required for activation/deactivation of the VelociFlow™. A 110 VAC or 24 VDC signal is needed. If your machine uses pulsed “m” codes please contact CFT Systems.
Required Electrical Power: 230 VAC or 440 VAC. Contact us for additional information.
Accessories: VelociFlow™ comes complete with wheels, coolant hoses, filters, and electrical connecting components.
Take the VelociFlow™ Pump Catalog With You
Get the complete printable PDF — specs, dimensions and every part number — sent straight to your inbox.