Drills

STRAIGHT SHANK • ULTRA-BRONZE COATED | SIZES 1/8″ – 9/16″ INCH

High Performance, Solid Carbide, (5X) drill. Designed for ultra performance drilling in a broad range of materials, including mild steel, alloy steel, stainless steel, and super alloys. This solid carbide coolant drill combined with our advanced Ultra-Bronze coating makes this your drill of choice.

METRIC • STRAIGHT SHANK • ULTRA-BRONZE COATED | SIZES 3.0 – 14.0 MM

High Performance, Solid Carbide, (5X) metric drill. Designed for ultra performance drilling in a broad range of materials, including mild steel, alloy steel, stainless steel, and super alloys. This solid carbide coolant drill combined with our advanced Ultra-Bronze coating makes this your drill of choice.

STRAIGHT SHANK • ULTRA-BRONZE COATED | SIZES 1/8″ – 1/2″ INCH

High Performance, Solid Carbide, (7X) drill. Designed for ultra performance drilling in a broad range of materials, including mild steel, alloy steel, stainless steel, and super alloys. This solid carbide coolant drill combined with our advanced Ultra-Bronze coating makes this your drill of choice.

METRIC • STRAIGHT SHANK • ULTRA-BRONZE COATED | SIZES 3.0 – 12.0 MM

High Performance, Solid Carbide, (7X) metric drill. Designed for ultra performance drilling in a broad range of materials, including mild steel, alloy steel, stainless steel, and super alloys. This solid carbide coolant drill combined with our advanced Ultra-Bronze coating makes this your drill of choice.

SOLID CARBIDE • TiN COATED • STRAIGHT SHANK | SIZES 3/16″ – 1/2″ INCH

High performance, C2 10% Micro Grain Carbide drill with helical coolant holes designed for deep holes 5x diameter. Successfully drills stainless such as 304 and 315, nickel alloy materials, cast iron aluminum and some carbon steels. Increase production with higher speed/feed rates and decreased cycle times.

SOLID CARBIDE • TiAlN COATED • STRAIGHT SHANK | SIZES 3/16″ – 1/2″ INCH

High performance, C5 tough steel grade carbide with helical coolant holes for deep holes 5x diameter. Designed with a special shaped chisel edge for drilling tough low carbon steel applications at high speeds while maintaining accuracy, straightness and finish. Increase production with higher speed/feed rates and decreased cycle times.

METRIC • SOLID CARBIDE • TiN COATED • STRAIGHT SHANK | SIZES 4.0 – 11.0 MM

High performance, C2 10% Micro Grain Carbide drill with helical coolant holes designed for deep holes 5x diameter. Successfully drills stainless such as 304 and 315, nickel alloy materials, cast iron aluminum and some carbon steels. Increase production with higher speed/feed rates and decreased cycle times.

METRIC • SOLID CARBIDE • TiAlN COATED • STRAIGHT SHANK | SIZES 4.0 – 11.0 MM

High performance, C5 tough steel grade carbide with helical coolant holes for deep holes 5x diameter. Designed with a special shaped chisel edge for drilling tough low carbon steel applications at high speeds while maintaining accuracy, straightness and finish. Increase production with higher speed/feed rates and decreased cycle times.

SOLID CARBIDE • ULTRA-GOLD COATED • TWO FLUTE PARABOLIC • COMMON SHANK | SIZES 3/16″ – 17/32″ INCH

The Helical Wear Resistant (HWR) point is self-centering, eliminating the need for center drilling and is a low torque, free chip forming design with excellent edge retention when combined with this unique flute form. The parabolic flute eliminates the necessity of “pecking” to clear chips while allowing for much longer useful tool life in regrinding. The combination of unique flute and point configuration provides up to 2.5 times the strength of conventional drill designs. Recommended for non-ferrous materials such as aluminum and aluminum alloys, free machining stainless steel, steel and cast iron and composites.

SOLID CARBIDE • ULTRA-GOLD COATED • THREE FLUTE PARABOLIC • COMMON SHANK | SIZES 3/16″ – 17/32″ INCH

Designed for a broad spectrum of materials from aluminum, brass, bronze and cast iron to stainless and hardened steels. This design generally provides for a rounder and straighter hole with closer hole tolerances and better hole wall finishes than most conventional two flute drills. Our special 150º point cuts all the way to the center which will allow the drill to start immediately without “walking” while providing excellent chip formation without tearing at or near the center like most other manufacturers’ three lip points.

SOLID CARBIDE • AlTiN COATED • COMMON SHANK | SIZES 3/16″ – 1/2″ INCH

10% Micro-grain Solid Carbide. High performance solid carbide drill designed for drilling in stainless steels and high temperature alloy materials. 142 high performance point in conjunction with the AlTiN coating improves chip clearance and extends tool life in these difficult to machine materials. Common shank sizes for use with Shrink-Fit ® and other precision toolholders. Depths to 5x diameter.

METRIC • SOLID CARBIDE • AlTiN COATED • COMMON SHANK | SIZES 5.0 – 11.0 MM

10% Micro-grain Solid Carbide. High performance solid carbide drill designed for drilling in stainless steels and high temperature alloy materials. 142 high performance point in conjunction with the AlTiN coating improves chip clearance and extends tool life in these difficult to machine materials. Common shank sizes for use with Shrink-Fit ® and other precision toolholders. Depths to 5x diameter.

SOLID CARBIDE • AlTiN COATED • COMMON SHANK | SIZES 3/16″ – 1/2″ INCH

10% Micro-grain Solid Carbide. High performance solid carbide drill designed for drilling in stainless steels and high temperature alloy materials. 142 high performance point in conjunction with the AlTiN coating improves chip clearance and extends tool life in these difficult to machine materials. Common shank sizes for use with Shrink-Fit ® and other precision toolholders. Depths to 7x diameter. Slotted coolant entry.

METRIC • SOLID CARBIDE • AlTiN COATED • COMMON SHANK | SIZES 5.0 – 11.0 MM

10% Micro-grain Solid Carbide. High performance solid carbide drill designed for drilling in stainless steels and high temperature alloy materials. 142 high performance point in conjunction with the AlTiN coating improves chip clearance and extends tool life in these difficult to machine materials. Common shank sizes for use with Shrink-Fit ® and other precision toolholders. Depths to 7x diameter. Slotted coolant entry.

SOLID CARBIDE • AlTiN COATED • COMMON SHANK | SIZES 3/16″ – 1/2″ INCH

10% Micro-grain Solid Carbide. High performance solid carbide drill with double margin and 18 degree helix designed for drilling in gray and ductile cast iron and other ferrous materials. 142 high performance point and helix design, in conjunction with the AlTiN coating, allows greater strength, and extends tool life in these applications. Common shank sizes for use with Shrink-Fit ® and other precision toolholders. Depths to 5x diameter.

METRIC • SOLID CARBIDE • AlTiN COATED • COMMON SHANK | SIZES 6.00 – 11.00 MM

10% Micro-grain Solid Carbide. High performance solid carbide drill with double margin and 18 degree helix designed for drilling in gray and ductile cast iron and other ferrous materials. 142 high performance point and helix design, in conjunction with the AlTiN coating, allows greater strength, and extends tool life in these applications. Common shank sizes for use with Shrink-Fit ® and other precision toolholders. Depths to 5x diameter.

H.S. COBALT ASP 30 POWDERED METAL • HARDLUBE COATED • FAST SPIRAL, PARABOLIC FLUTE | SIZES 5/32″ – 1/2″ & 4.0 – 12.50 MM

Performs similar to carbide, but is more suitable for a wider range of materials and machine tools. The hardlube treatment with tungsten carbide is excellent for chip evacuation, extending tool life and cutting edge durability. Manufactured with ASP 30 Powdered Metal for longer life and consistent performance. 135 degree split point is suitable for drilling aluminum, tough alloys, standard alloys, stainless steel and tool steel.

COBALT • STRAIGHT SHANK | SIZES 1/4″ – 1″ INCH

High performance spot drill designed to prevent work hardening conditions caused by lack of lubrication at the drill point on tough or hard materials. Provides fast accurate spotting and single operation centering and chamfering. Match spot drill and follow-up drill point angles to reduce chance of chipping the follow-up drill during initial penetration. Zero body clearance prohibits drilling beyond point angle.

HIGH SPEED • STRAIGHT SHANK | SIZES 9/32″ – 1″ INCH

General purpose drill works well in materials ranging from soft to medium hard materials. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. Flute web is constant with rolled heel providing maximum chip clearance.

PARABOLIC • HIGH SPEED • STRAIGHT SHANK | SIZES 1/8″ – 19/64″ INCH

Parabolic style drill performs exceptionally well in aluminum and in most other materials. The 32° helix has excellent shearing action. Higher helix also assists chip flow in the vertical position. Parabolic design gives maximum chip room and lift in deep hole drilling. Split point design is self centering and provides accurate hole locations. For tough materials and machining applications Ultra-Bronze coating is now available.

METRIC • PARABOLIC • COBALT • TiN COATED • CNC SHANK | SIZES 5.0 – 14.0 MM

Cobalt parabolic style drill with versatile CNC shank works well in most materials and is an outstanding performer in harder materials. Excellent substitute when machines do not have the proper speed and feed for carbide. Parabolic design provides maximum chip room. The stubby length of these drills makes them sturdy. Furnished titanium nitride coated.

HIGH SPEED • STRAIGHT SHANK | SIZES 1/8″ – 1-1/2″ INCH

General purpose drill works well in materials ranging from soft to medium hard. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22° – 24° helix has constant web thickness with rolled heel providing maximum chip clearance.

SLOW SPIRAL • HIGH SPEED • STRAIGHT SHANK | SIZES 5/16″ – 1-1/2″ INCH

General purpose slow spiral drill works best in horizontal applications on materials ranging from soft to hard. 14º slow spiral produces uninterrupted chip flow and increases edge strength. Notch point provides good chip formation when the proper speeds and feeds are applied.

COBALT • STRAIGHT SHANK | SIZES 3/8″ – 1″ INCH

Heavy duty cobalt drill designed for use in abrasive or hard materials where speed is not the primary consideration. Heavy web thickness makes this drill extremely sturdy in these tough materials. Does not work well in aluminum or soft steels. Split point design is self centering and provides accurate hole locations.

HIGH SPEED • STRAIGHT SHANK | SIZES 1/8″ – 1/2″ INCH

General purpose drill works well in materials ranging from soft to medium hard materials. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22° – 24° helix has constant web thickness with rolled heel providing maximum chip clearance.

METRIC • HIGH SPEED • STRAIGHT SHANK | SIZES 3.0 – 13.0 MM

General purpose metric drill for use in soft to medium hard materials. Suitable for both horizontal and vertical applications. Higher helix assists chip flow in the vertical position. Notch point provides good chip formation when the proper speeds and feeds are applied.

COBALT • TiN COATED • STRAIGHT SHANK | SIZES 1/8″ – 1/2″ INCH

Heavy duty cobalt drill designed for use in abrasive or hard materials where speed is not the primary consideration. Heavy web thickness makes this drill extremely sturdy in these tough materials. Does not work well in aluminum or soft steels. Split point design is self centering and provides accurate hole locations.

7″ FLUTE • PARABOLIC • HIGH SPEED • STRAIGHT SHANK | SIZES 1/8″ – 3/4″ INCH

Parabolic style drill performs exceptionally well in aluminum and in most other materials. The 32º helix has excellent shearing action. Higher helix also assists chip flow in the vertical position. Parabolic design gives maximum chip room and lift in deep hole drilling. Split point design is self centering and provides accurate hole locations. For tough machining applications Ultra-Bronze coating is available.

9″ FLUTE • HIGH SPEED • STRAIGHT SHANK | SIZES 3/16″ – 1-1/16″ INCH

General purpose drill works well in materials ranging from soft to medium hard. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22º to 24º helix has constant web thickness with rolled heel providing maximum chip clearance.

9″ FLUTE • COBALT • STRAIGHT SHANK | SIZES 5/16″ – 1-1/16″ INCH

Heavy duty cobalt drill designed for use in abrasive or hard materials where speed is not the primary consideration. Heavy web thickness makes this drill extremely sturdy in these tough materials. Does not work well in aluminum or soft steels. Split point design is self centering and provides accurate hole locations.

10″ FLUTE • HIGH SPEED • STRAIGHT SHANK | SIZES 5/16″ – 1-3/8″ INCH

General purpose drill works well in materials ranging from soft to medium hard. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22º to 24º helix has constant web thickness with rolled heel providing maximum chip clearance.

12″ FLUTE • HIGH SPEED • STRAIGHT SHANK | SIZES 5/16″ – 1-3/8″ INCH

General purpose drill works well in materials ranging from soft to medium hard. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22º to 24º helix has constant web thickness with rolled heel providing maximum chip clearance.

18″ FLUTE • HIGH SPEED • STRAIGHT SHANK | SIZES 5/16″ – 1″ INCH

General purpose drill works well in materials ranging from soft to medium hard. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22º to 24º helix has constant web thickness with rolled heel providing maximum chip clearance.

21″ FLUTE • HIGH SPEED • STRAIGHT SHANK | SIZES 5/16″ – 47/64″ INCH

General purpose drill works well in materials ranging from soft to medium hard. Suitable for both horizontal and vertical drilling. Notched point provides good chip formation when the proper speeds and feeds are applied. The 22º to 24º helix has constant web thickness with rolled heel providing maximum chip clearance.